John Deere LED Work Light
A quality LED work light is a great upgrade to any tractor. Compared to traditional lights, they provide better illumination and have an extended lifespan.
The LLP-JD-TR-4050-CLU from Larson Electronics is a complete LED tractor light package and cab light retrofit kit for John Deere tractors. It includes four LEDLB-10R-CPR LED flood lights and two LEDEQ-3X2-CPR LED work lights.
A key benefit of John Deere LED work lights is that they emit up to 330 percent more light than standard bulbs, giving you the ability to see farther and better. They also use less power, making them easier on your battery and alternator.
These lights bolt right into a tractor’s existing grill light mount, so you don’t have to make any complicated or costly alterations. They are compatible with both the left-hand upper cab and boom light on Hitachi excavators, as well as the center grill lights in Case backhoe loaders, skid steers and trenchers and John Deere feller bunchers and wheel loaders.
They are made to withstand harsh environments, John Deere LED Work Light featuring die-cast aluminum housings that act as heat sinks, allowing them to disperse more heat and extend the life of the electronics. They also feature filters to eliminate unwanted radio and electromagnetic frequencies, helping you avoid interference with your equipment’s electronic controls.
Some of these lights use COB (chip on board) technology, which allows more LEDs to be mounted on the surface of a bulb. This allows them to be smaller, lighter and use even less energy than non-COB lights of the same brightness. Other features include a waterproof rating and stainless-steel hardware to resist corrosion. Some work lights also come with retractable cords that help keep you from accidentally yanking the light out of the wall or off your tractor’s frame.
LED lights for tractors offer a more durable construction that is rust and shock-resistant. They also utilize a quick-cooling design, which extends their lifespan and performance. These features make them a better option than HID lights for tractors. They are available as a kit or a stand-alone light. The LLP-JD-TR-7230-CLU LED light package is designed as a cab lighting upgrade for John Deere 7230 tractors and includes four LEDLB-10R-CPR LED flood lights and two LEDEQ-3X2-CPR LED work lights.
The CREE LED bulbs used in this LED tractor light are known for their high lumen-per-watt ratio and longevity. They are made with a durable polycarbonate lens and a rugged aluminum housing. They are rated IP67 for protection from dust and water immersions up to 3.3 feet. The color of the LEDs emit is near the color spectrum of the mid-day sun, which reduces eye strain and helps drivers function more efficiently in dark conditions.
These John Deere LED lights can be mounted on the front upper cab, rear fender or work light mount of your tractor. They use the same wiring connections as sealed beam lights, so upgrading to LEDs is an easy and straightforward process. They also consume fewer amps than halogen bulbs, which helps reduce your electrical bill. They also have a longer lifespan than standard bulbs, saving you money over the long term.
Reduced Eye Strain
When you’re on the job all day, it’s important to stay as focused as possible. But glare from the sun or even a poorly designed light can cause eye strain that can slow you down and make your work more difficult.
LED lights eliminate eye strain by producing less glare than metal halide bulbs. They also turn on and off instantly, reducing the need for a warm-up period. This results in a significant reduction in the amount of energy that is consumed by the lights. This translates into huge cost savings over the life of your LED work lights.
Additionally, our John Deere LED Work Lights are engineered to reduce glare by providing the perfect balance between high and low intensity. They’re also equipped with a fade-resistant PC lens, enhancing their lifespan and allowing for superior light utilization. The anti-static CREE chips and ideal beam pattern also help to prevent eye strain during longer usage.
Our LED work lights for tractors are also made of high-grade aluminum and stainless steel, making them resistant to moisture, dust, and other weather elements. They’re rated to IP67, meaning they can John Deere LED Work Light withstand water immersions up to 3.3 feet. They’re also shock and rust-resistant, so they can withstand even the harshest conditions. They’re mounted using a form fitting trunnion mount with knurled knobs that can be loosen and tightened to allow for easy adjustments.
Easy to Install
NORDIC lights are easy to install and plug into your John Deere tractor’s existing wiring. They also don’t draw as much electrical power as regular halogen bulbs, making them easier on your tractor battery and alternator. LED lighting is 330 percent brighter than halogen and will illuminate your entire field, making it easier to work around the clock and reducing eye strain.
Unlike regular bulbs, LED work light bulbs can be easily changed. Simply pull out the old bulb and replace it with a new one. It’s that simple and can save you money over the long term. LED lights are not only cheaper, but they are also more energy efficient, meaning that you can keep working longer without draining your batteries.
The LT-350 LED Light is an oval light that fits into the hood of your John Deere Tractor and looks like the original OEM one, but it’s supercharged with performance. It is available in a wide variety of light patterns, giving you the freedom to choose between a broad flood beam or a narrower spot.
The HP-2 is a 4″ LED light made for use on most tractors and combines where a small square light is needed. It has a 60 degree light beam, 3300 lumen effective. This is a great replacement for many small OEM lights.